| |
Wheelmove Specifications
|
|
| |
- Pipe - LAKE alum 5"x40'x.078 3004-H26 aluminum pipe
seam welded.
- Pipe - LAKE alum 4"x40'x.072 3004-H26 aluminum pipe
seam welded.
- Flange adapter: CROWN AM 8 hole flange x press with
pre packaged CROWN AM nut, bolt & flange gasket assembly.
- Wm wheel: CROWN AM 18 ga wheel, single or double cleat,
4" or 5" CROWN AM precision 9-hole split hub 58" dia, 64"
dia, or 76" dia.
- Mover: CROWN AM CROP KING Mover, Briggs & Stratton 8
hp vertical shaft engine, one piece cover with no openings,
low profile for visibility both directions, pre-assembled
power pack. 12 ft single frame with drain for maintenance
& cleaning capabilities. CROWN AM mover hydraulic locking
control valve capabilities.
- Mover: CROWN AM HARVEST KING mover, Briggs & Stratton
8 hp horizontal shaft engine. One piece cover with openings
for control valve & engine starting. 12 ft frame with drain
for maintenance & cleaning capabilities. CROWN AM mover
hydraulic locking control valve capabilities.
- Mover: CROWN AM DUAL KING mover, Briggs & Stratton 8
hp vertical shaft engine. Low profile one piece cover, epoxy
coated remote oil tank with drain for ease cleaning. Pre-assembled
power pack. 15 ft twin rail design. CROWN AM mover hydraulic
locking control valve capabilities.
- Couplers: CROWN AM TORQUE COUPLER ASSEMBLY. CROWN AM
interlocking 89 gear tooth high quality die cast aluminum
with single CROWN AM flapper drain assembly or CROWN AM
double mushroom drain assembly with CROWN LOCK torque coupler
clamp and CROWN AM QUAD gasket.
- Hose set: CROWN AM 4" black rubber discharge hose with
CROWN AM male latch x CROWN AM male latch hose ends with
CROWN AM slip band and latch. ( alum or steel)
- Flush plug: CROWN AM interlocking 89 gear tooth one
piece die cast body with CROWN AM splash guard. Manual control
with CROWN AM double drains, include CROWN AM mushroom drain
assembly.
- Press bands: CROWN AM MHB, 4" OR 5" 15 ga aluminum bands.
- End feed adapter: CROWN AM interlocking 89 gear tooth
die cast alum torque coupler with CROWN AM 14 ga "R" or
"RO" hose coupler. Includes 4" CROWN AM torque coupler QUAD
gasket and CROWN AM 4" CHEVRON gasket.
- Press on hose end feed coupler : CROWN AM 14 ga 4" "R"
or "RO" steel galv hose coupler x press with CROWN AM CHEVRON
gasket.
|
|
| |
|
|
